Towards the end of the Lord of the Rings trilogy, Aragorn carried a sword named Anduril, which was forged from the shards of Narsil, the sword that cut the ring from Sauron’s finger thousands of years earlier.

The prop from the movies has become one of the most recognizable of all the swords from the franchise, and if you’re looking for an Aragorn sword replica, you’re in the right place. This guide should get you to where you need to go.

Concerning Aesthetic Quality and Value 

Not all Aragorn sword replicas are created equal. If you’re looking for one, here are two things to consider to ensure that it will deliver value:

• Does it come with a Certificate of Authenticity? Some replicas are only manufactured under license. If the sword comes with a Certificate of Authenticity, this is also a hedge that it will hold its value. 
  
  
• Does it faithfully capture the details from the films? For this one, you may need to rely on your discretion, but it is something important to consider nonetheless. 

Concerning Quality of Construction 

You should also consider the quality of construction of the sword replica itself. Any battle-ready sword should have three things: 

• A full-tang. The tang must be at least partially the width of the blade and should not be welded or threaded on. 
  
  
• Construction from a suitable steel alloy. Some alloys make for a good sword and others are either too soft or too brittle. 
  
  
• And a proper temper. It’s not just about the steel chemistry, but how the steel is heat-treated. You want a sword that is resilient enough to be struck without shattering or bending.

If it has these three things, the sword can be considered battle-ready and can be used for live cutting practice. 

Concerning Care After Purchase

You should also be prepared to properly care for the sword after you buy it. Here are some high-level notes.

• Avoid touching the blade if you can as salts and oils in your skin can cause corrosion. 
  
  
• If your sword is battle-ready and you use it for cutting practice, make sure you clean and dry the blade before storing the sword.
  
  
• Never stick the blade in the ground or throw the sword.
  
  
• Don’t allow the edge of the blade to contact any hard surfaces like wood or stone, as these will quickly damage it.
  
  
• Store the sword somewhere cool and dry, with consistently low humidity. 
  
  
• Remember to periodically oil the blade as this will help protect it against corrosion. 

There are other things you should know about proper sword care but these should help.

Where to Get an Aragorn Sword Replica 

At this point, you just need to know a place where you can get a good Aragorn sword replica, and the first place you should check is True Swords. They carry a wide range of Lord of the Rings sword replicas, including replicas of Anduril, Aragorn’s sword. Visit their website for more information and if you have questions get in touch with them. 

For more information about Rengoku Sword and Real Samurai Sword Please visit: True Swords.