-
Newsfeed
- ERKUNDEN
-
Seiten
-
Gruppen
-
Veranstaltungen
-
Reels
-
Blogs
-
Marktplatz
-
Angebote
-
Jobs
3 Ways to Shorten Your .300 Blackout Build (and 3 Reasons to Buy One)
You can build another 5.56 AR, or you can expand your horizons with a .300 Blackout build kit, and there are plenty of good reasons to do so.
And, if you are building one, here are 3 ways you can make the build shorter.
Start with a Short Upper
Because .300 BLK performs so well from a short barrel, there is no reason not to start with the shortest upper that makes sense.
You don’t need to settle for a 10 inch upper, either. You can go a lot shorter than that, and there are 5 inch AR uppers out there, even 4 inch micro AR uppers that really shorten the build.
Doing so doesn’t just result in a shorter build that is more maneuverable in tight spaces, shortening the barrel (which is usually the heaviest AR part) will considerably lighten the platform as well.
Remove the Flash Hider
If you get a .300 Blackout build kit that has a flash hider, there’s not much reason not to remove it. All it does is add length and mass to the barrel.
It would make sense to add a muzzle brake, because that would lighten the rifle and reduce recoil, but it would also add mass. So the recommendation here is to remove the flash hider and install thread protectors.
Thread protectors will add almost no mass, will not add any appreciable length if they add length at all, and they will make sure that your threads don’t get damaged.
Install a Short Buffer Tube
There are short buffer tubes that are specifically designed for AR pistols that will shorten and potentially lighten the overall build.
Bufferless is not really an option with a cartridge that produces these pressures, so your best bet is to go with a short buffer tube that will accomplish roughly the same objective.
So Why Build a .300 BLK AR in the First Place?
Now that you have some suggestions for making a .300 BLK ARP, here are some reasons to get a .300 Blackout build kit in the first place.
Better Stopping Power
The .300 BLK offers considerably more stopping power than 5.56, so if you’re tossed up between those two and power is important to you, then go with .300 BLK.
Better Short Barrel Performance
Another massive advantage of .300 BLK is that you can achieve the desired ballistic performance from a barrel of 10 inches or even shorter. If you make a micro ARP chambered in 5.56 (which is possible) you will be leaving performance on the table.
Better Suppression
Both 5.56 and .300 BLK can be suppressed, but .300 BLK performs better when suppressed, and on top of that, there are really reliable subsonic .300 BLK rounds that hit hard and shoot like a whisper when suppressed.
Where to Get a .300 Blackout Build Kit
Thinking a .300 Blackout build kit is the way to go for your next build? Check out MCS Gearup. They carry a wide range of options, including micro ARP builds. Visit their website and pick up a build kit for your next build today.
For more information about 556 upper and M Lok Rail System Please visit: MCS Gearup.
- Art
- Causes
- Crafts
- Dance
- Drinks
- Film
- Fitness
- Food
- Spiele
- Gardening
- Health
- Startseite
- Literature
- Music
- Networking
- Andere
- Party
- Religion
- Shopping
- Sports
- Theater
- Wellness