3 Ways to Shorten Your .300 Blackout Build (and 3 Reasons to Buy One)

0
5

You can build another 5.56 AR, or you can expand your horizons with a .300 Blackout build kit, and there are plenty of good reasons to do so. 

And, if you are building one, here are 3 ways you can make the build shorter. 

Start with a Short Upper

Because .300 BLK performs so well from a short barrel, there is no reason not to start with the shortest upper that makes sense.

You don’t need to settle for a 10 inch upper, either. You can go a lot shorter than that, and there are 5 inch AR uppers out there, even 4 inch micro AR uppers that really shorten the build. 

Doing so doesn’t just result in a shorter build that is more maneuverable in tight spaces, shortening the barrel (which is usually the heaviest AR part) will considerably lighten the platform as well.

Remove the Flash Hider 

If you get a .300 Blackout build kit that has a flash hider, there’s not much reason not to remove it. All it does is add length and mass to the barrel. 

It would make sense to add a muzzle brake, because that would lighten the rifle and reduce recoil, but it would also add mass. So the recommendation here is to remove the flash hider and install thread protectors. 

Thread protectors will add almost no mass, will not add any appreciable length if they add length at all, and they will make sure that your threads don’t get damaged.

Install a Short Buffer Tube 

There are short buffer tubes that are specifically designed for AR pistols that will shorten and potentially lighten the overall build. 

Bufferless is not really an option with a cartridge that produces these pressures, so your best bet is to go with a short buffer tube that will accomplish roughly the same objective. 

So Why Build a .300 BLK AR in the First Place?

Now that you have some suggestions for making a .300 BLK ARP, here are some reasons to get a .300 Blackout build kit in the first place. 

Better Stopping Power 

The .300 BLK offers considerably more stopping power than 5.56, so if you’re tossed up between those two and power is important to you, then go with .300 BLK. 

Better Short Barrel Performance 

Another massive advantage of .300 BLK is that you can achieve the desired ballistic performance from a barrel of 10 inches or even shorter. If you make a micro ARP chambered in 5.56 (which is possible) you will be leaving performance on the table.

Better Suppression

Both 5.56 and .300 BLK can be suppressed, but .300 BLK performs better when suppressed, and on top of that, there are really reliable subsonic .300 BLK rounds that hit hard and shoot like a whisper when suppressed.

Where to Get a .300 Blackout Build Kit

Thinking a .300 Blackout build kit is the way to go for your next build? Check out MCS Gearup. They carry a wide range of options, including micro ARP builds. Visit their website and pick up a build kit for your next build today. 

For more information about 556 upper and M Lok Rail System Please visit: MCS Gearup.

Pesquisar
Categorias
Leia mais
Outro
Glucotex – Natürlich im Gleichgewicht [Glucotex Kapseln]
Schwangerschaft und Stillzeit Glucotex Während Schwangerschaft und Stillzeit sollte die...
Por glucotex 2026-08-29 05:52:42 0 633
Outro
Key Diaphragm Pump Manufacturers: Strategies and Competitive Landscape
The global diaphragm pump market is characterized by intense competition among established pump...
Por Rushikeshwgr 2026-07-07 10:34:01 0 817
Health
Beyond Cessation: The Expanding Role of Nicotine Thin Films in Tobacco Harm Reduction Strategies
The global public health community is witnessing a significant expansion in the use of innovative...
Por sarthak1234 2026-08-08 00:35:19 0 366
Health
Future Perspectives on HD White Light Laparoscopy and Surgical Imaging Excellence
The global expansion of the Hd White Light Laparoscopy Market is closely tied to a complex...
Por anjushinde13 2026-06-20 10:23:43 0 691
Outro
Plastic Waste Management Market Growth: Sustainability Initiatives Fueling Industry Demand
The Plastic Waste Management Market is witnessing significant transformation, shaped by...
Por pritijain1999 2026-09-08 11:00:52 0 2KB